Product Development
Purpose: MMMI presents a new product development – MM Hybrid Engineered Repair Kit.
Trainings
4 DAYS COURSE SDI OPEN WATER AT UWEC and SAUJANA LAKE - 25th NOVEMBER 2024 to 28th NOVEMBER 2024
Yayasan Peneraju Weldcraft Pro Training - 11th November 2024 to 22th November 2024
Congrats and Thank You to UWEC/ MMMI dedicated/integrated Staff and Associates..Alhamdulillah including this Yayasan Peneraju (YP) Scholars – cohort 16; our total YP Students that have become (and in the making) Professional Underwater Welders are already 111 divers. The balance left is only 39 out of the contractually allocated target numbers of 150 Bumiputra commercial divers. This Program has been fully sponsored by Yayasan Peneraju (Government Agency) – RM28K per person since the inception of this program in the middle of last year to boost the economy and income among Bumiputras in Malaysia through the Upskilling Grant. Thank you very much to Yayasan Peneraju for this priceless contribution. Other than YP scholars, 4 from Non YP scholars (but local divers) and 14 international students (from India, Philippine, UAE, Brunei, Japan, Australia and etc) have significantly contributed to the total numbers of 129 graduates as of now.
Yayasan Peneraju Weldcraft Pro Training - 21th October 2024 to 1st November 2024
Training Gas Tungsten Arc Welding (GTAW) from KYB - 15th Oktober 2024 to 17th Oktober 2024
Yayasan Peneraju Weldcraft Pro Training - 23th September 2024 to 4th Oktober 2024
Training Introduction to Wet Welding - 10th September 2024 - 13th September 2024
MM Hybrid Repair Training- 7th August 2024
Yayasan Peneraju Weldcraft Pro Training - 23th September 2024 to 23th September 2024
4 Days Course SDI Open Water at UWEC and Saujana Putra Lake - 5th August 2024 to 8th August 2024
Training Introduction To Wet Welding - 29th July 2024 to 1st August 2024
SICW Training (CIDB) - 13th July 2024
Yayasan Peneraju Weldcraft Pro Training - 15th July 2024 to 26th July 2024
Yayasan Peneraju Weldcraft Pro Training - 20th June 2024 to 01st July 2024
Arc Gas Training (Introduction To Wet Welding & Dry Welding) - 27th May 2024 to 31st May 2024
Yayasan Peneraju Weldcraft Pro Training - 29th May 2024 to 09th June 2024
Yayasan Peneraju Weldcraft Pro Training - 18th April 2024 to 29th April 2024
Yayasan Peneraju Weldcraft Pro Training - 14th March 2024 to 25th March 2024
Yayasan Peneraju Weldcraft Pro Training - 13th February 2024 to 24th February 2024
Yayasan Peneraju Weldcraft Pro Training - 08th January 2024 to 19th January 2024
Yayasan Peneraju Weldcraft Pro Training - 06th November 2023 to 17th November 2023
Yayasan Peneraju Weldcraft Pro Training - 09th October 2023 to 20th October 2023
Certificate have been submitted to six students from cohort 4 who have already completted their training in UWEC Manual Metal Arc Welding (MMA) for both dry and wet welding
Yayasan Peneraju Weldcraft Pro Training - 04th September 2023 to 15th September 2023
Yayasan Peneraju Weldcraft Pro Training - 07th August 2023 to 18th August 2023
Graduation Day and the first YP Scholar (En Nazri) from Cohort 2 who sat and passed the Professional Advanced Diploma VIVA Exam carried out by Mr Matthew Walton from London Examinations Board UK – LEB/KLIEC/UTM Space
Yayasan Peneraju Weldcraft Pro Training - 03th July 2023 to 14th July 2023
Online Weldcraft Pro Exam
Effective Communication and Technical Writing Training (Soft Skill) – Delivered by Pn Salwa (Professional Coach)
We are proud to have our first batch for the new JPK SKM program that will begin on 02nd August 2022 until 2nd February 2024.
- Orientation Week 1 First Intake: 02nd August – 05th August
- Orientation Week 2 Second Intake: 15th August – 19th August
Date: 18th July to 29th July 2022
Venue: MM Matrix Integrity / U.W.E.C
Welcome and Good Luck to new Weldcraft Pro students! The class has just started and it is indeed a real gateway to become a Professional Wet Welder. Students will complete their 80 credit hours and the course is split over two phases; dry and wet weldings which include theories and practices. Finally, students have to sit for the final exam, witnessed by a third party SIRIM Inspector. The results will be examined by Weldcraft Pro in the UK, and verified by a reputable EAL SEMTA UK before they can be awarded with Certificate of Competence (Weldcraft Pro), Certificate of Verified Achievement (EAL) and Welder Qualification Test Certificate (E4) which is accredited by Zurich Surveyor. This programme follows the guidelines as stated under the European Welding Federation (EWF) document 570-01, with qualifications (codes) being awarded in accordance with ISO 15618-1:2016 or AWS D3.6M:2017 for fillet welds on plate and is the only class society (ABS) approved underwater welding programme available in the world.
- Day 1: 18th July 2022
- Day 2: 19th July 2022
- Day 3: 20th July 2022
- Day 4: 21st July 2022
- Day 5: 22nd July 2022
- Day 6: 23rd July 2022
- Day 8: 25th July 2022
- Day 10: 27th July 2022
- Day 11: 28th July 2022
Date: 06th June to 17th June 2022
Venue: MM Matrix Integrity / U.W.E.C
Welcome and Good Luck to new Weldcraft Pro students! The class has just started and it is indeed a real gateway to become a Professional Wet Welder. Students will complete their 80 credit hours and the course is split over two phases; dry and wet weldings which include theories and practices. Finally, students have to sit for the final exam, witnessed by a third party SIRIM Inspector. The results will be examined by Weldcraft Pro in the UK, and verified by a reputable EAL SEMTA UK before they can be awarded with Certificate of Competence (Weldcraft Pro), Certificate of Verified Achievement (EAL) and Welder Qualification Test Certificate (E4) which is accredited by Zurich Surveyor. This programme follows the guidelines as stated under the European Welding Federation (EWF) document 570-01, with qualifications (codes) being awarded in accordance with ISO 15618-1:2016 or AWS D3.6M:2017 for fillet welds on plate and is the only class society (ABS) approved underwater welding programme available in the world.
- Student’s Feedback
- Week 2: Wet Welding
- Week 1: Dry Welding
- Day 1: 6th June 2022
- Day 2: 7th June 2022
- Day 3: 8th June 2022
- Day 4: 9th June 2022
- Day 5: 10th June 2022
- Day 8: 13th June 2022
- Day 9: 14th June 2022
- Day 10: 15th June 2022
- Day 11: 16th June 2022
- Day 12: 17th June 2022
Date: 22 & 23th January 2022
Venue: MM Matrix Integrity / U.W.E.C
Collaboration between UWEC with KLIEC/UTMSpace.
Purpose: Introduction to Dry and Underwater Wet Welding for Diploma in Technology Management and Underwater Welding (DTMU) Program.
- Day 1: 22th January 2022
- Day 2: 23th January 2022
Date: 19th January 2022
Venue: MM Matrix Integrity
Purpose: MMMI Product Training and Awareness.
Date: 26th October – 2th November 2021
Venue: MM Matrix Integrity
Purpose: Rental Underwater Tanks Facilities for WPQT/WQT.
Client: Noe Key Sdn Bhd and ECMS Sdn Bhd
Witness: Det Norske Veritas (DNV) and Petronas Chemical MTBE
Underwater Tanks Facilities
Event Photos
Date: 21th September 2021
Venue: MM Matrix Integrity
Purpose: MMMI in-house applicator qualifications training for Pioneer Pegasus.
Date: 25th August 2021
Platform: Online (Google Meet)
Purpose: MM Matrix Integrity (M) Sdn Bhd (MMMI) is pleased to inform that a Talk on Safety and Wire Rope Inspection to Royal Malaysian Navy (RMN) officers was successfully delivered on 25/08/21 by MMMI’s General Manager, Lt Commander (Rtd) RMN Ts Anizan Bin Ali, CEng, MIET. Congrats Ts Anizan! His remarkable talk InshaaAllah has provided an insight into the importance of structural integrity fundamental in wire ropes application per se. The wire rope Leeb technology that is exclusively carried by MMMI UWEC is considered a game changer in the wire rope engineering field apparently. This is because the equipment does not only provide a quality Local Flaw (LF) detection but most importantly though a reliable Loss of Metal Area (LMA) assessment (Note: a common and present practice is normally Local Flaw detection only). Hence, this benefit literally will help many asset owners sooner or later in terms of optimising the life span or usage of their wire ropes / cables without compromising safety aspects and/or other people’s lives. To learn more about this technology and equipment, our Underwater Welding Engineering Centre (UWEC) offers a FREE 2 Day Course to anyone whom is eligible under HRDC (formerly known as HRDF) Claimable Scheme.
For more information about our training events, please visit our UWEC website at https://lnkd.in/g-yunu8g
Date: 11th August 2021
Platform: Online (VooV Meeting)
Purpose: Wire Rope Flaw Detector Training for MMMI staff, organized by Chongqing Leeb Instrument Co., Ltd to promote Leeb products in Malaysia.
- Day 1 : 17 September 2020 (Team 1) – 11 Students
- Day 2: 18 September 2020 (Team 2) – 10 Students
- Day 3: 19 September 2020 (Team 3) – 17 Students
Date : 12th September 2020
Location: Sekolah Menengah Imtiaz Ulul Albab, Melaka
Purpose: Cardiopulmonary resuscitation (CPR): First aid and Fire Fighting & Extinguishers
Date : 15th August 2020
Location: Sungai Buah Lake
Purpose: Fabrication and Erection of Jetty
Team 3 (Date = 13/07/2020, Day 1) – Discovery Scuba(Theory class)
- Team 3 (Date = 14/07/2020, Day 2) – Discovery Scuba(Practical class)
- Team 3 (Date = 15/07/2020, Day 3) – Introduction to WeldcraftPro Chapter 1
- Team 3 (Date = 16/07/2020, Day 4) – Introduction to WeldcraftPro Chapter 1
- Team 3 (Date = 17/07/2020, Day 5) – SKM PPT Development
- Team 3 (Date = 18/07/2020, Day 6) – Open Water(Day 1)
- Team 3 (Date = 20/07/2020, Day 7) – Open Water(Day 2)
- Team 4 (Date = 20/07/2020, Day 1) – Discovery Scuba(Theory class)
- Team 3 (Date = 21/07/2020, Day 8) – Open Water(Day 3)
- Team 4 (Date = 21/07/2020, Day 2) – Discovery Scuba (Practical)
- Team 3 (Date = 22/07/2020, Day 9) – Open Water(Day 4)
- Team 4 (Date = 22/07/2020, Day 3) – Introduction to WeldcraftPro Chapter 1 (Day 1)
- Team 3 (Date = 23/07/2020, Day 10) – Open Water(Day 5)
- Team 4 (Date = 23/07/2020, Day 4) – Introduction to WeldcraftPro Chapter 1 (Day 2)
- Team 3 (Date = 24/07/2020, Day 11) – Scuba Occupational (Week 1) Theory class
- Team 4 (Date = 24/07/2020, Day 5) – Open Water (Day 1)
- Team 4 (Date = 25/07/2020, Day 6) – Open Water (Day 2)
- Team 4 (Date = 26/07/2020, Day 7) – Open Water (Day 3)
- Team 3 (Date = 27/07/2020, Day 12) – Scuba Occupational (Week 1) Theory class
- Team 4 (Date = 27/07/2020, Day 8) – Open Water (Day 4)
- Team 3 (Date = 28/07/2020, Day 13) – Scuba Occupational (Week 1) Theory class
- Team 4 (Date = 28/07/2020, Day 9) – Open Water (Day 5)
- Team 3 (Date = 29/07/2020, Day 14) – Scuba Occupational (Week 1) Theory class
- Team 3 (Date = 30/07/2020, Day 15) – Scuba Occupational (Week 1) Theory class
- Team 3 (Date = 03/08/2020, Day 16) – Scuba Occupational (Week 2) Practical class + SKM PPT
- Team 4 (Date = 03/08/2020, Day 10) – SKM PPT Development & Scuba Occupational (Week 1) Theory class
- Team 3 (Date = 04/08/2020, Day 17) – Scuba Occupational (Week 2) Practical class
- Team 4 (Date = 04/08/2020, Day 11) – Scuba Occupational (Week 1) Theory class
- Team 3 (Date = 05/08/2020, Day 18) – Scuba Occupational (Week 2) Practical class
- Team 4 (Date = 05/08/2020, Day 12) – Scuba Occupational (Week 1) Theory class
- Team 3 (Date = 06/08/2020, Day 19) – Scuba Occupational (Week 2) Practical class
- Team 4 (Date = 06/08/2020, Day 13) – Scuba Occupational (Week 1) Theory class
- Team 4 (Date = 07/08/2020, Day 14) – Scuba Occupational (Week 1) Theory class
- Team 3 (Date = 10/08/2020, Day 20) – Scuba Occupational (Week 3) Practical class
- Team 4 (Date = 10/08/2020, Day 15) – Scuba Occupational (Week 2) Practical class
- Team 4 (Date = 11/08/2020, Day 16) – Scuba Occupational (Week 2) Practical class
- Team 3 (Date = 11/08/2020, Day 21) – Scuba Occupational (Week 3) & Basic Dry Welding Practical class
- Team 3 (Date = 12/08/2020, Day 22) – Scuba Occupational (Week 3) Practical class
- Team 4 (Date = 12/08/2020, Day 17) – Scuba Occupational (Week 2) Practical class
- Team 3 (Date = 13/08/2020, Day 23) – Scuba Occupational (Week 3) Practical class
- Team 4 (Date = 13/08/2020, Day 18) – Scuba Occupational (Week 2) Practical class
- Team 4 (Date = 14/08/2020, Day 19) – Scuba Occupational (Week 2) Practical class
- Team 4 (Date = 17/08/2020, Day 20) – Scuba Occupational (Week 3) Practical class
- Team 4 (Date = 18/08/2020, Day 21) – Scuba Occupational (Week 3) Practical class
- Team 4 (Date = 19/08/2020, Day 22) – Scuba Occupational (Week 3) & Basic Dry Welding Practical class
- Team 1 (Date = 22/06/2020, Day 1) – Welcoming back student from mco and elementary Rigging (Knotting) activity.
- Team 1 (Date = 23/06/2020, Day 2) – hand signal/Line signal training.
- Team 1 (Date = 24/06/2020, Day 3) – Rigging n lifting training
- Team 1 (Date = 25/06/2020, Day 4) – Hand Tools
- Team 2 (Date = 29/06/2020 – 1/7/2020, Commercial Scuba Diving Class)
- Team 2 (Date = 2/7/2020, SKM and Portfolio Development Session with Consultant)
- Team 2 (Date = 3/7/2020 – 6/7/2020, Open Water)
- Team 2 (Date = 29/07/2020) – Scuba Occupational
- Briefing & Screening Session For MITRA Underwater Program – 29 february 2020
- Discovery Scuba – Day 1 (2nd March 2020)
- Discovery Scuba – Day 2 (3rd March 2020)
- Introduction to WeldcraftPro Chapter 1 – Day 1(4th March 2020)
- Examination & Interview Session with MITRA for Team 1; Discovery Scuba Day 2 for Team 2- (10th March 2020)
- Open Water for Team 1 and Introduction to WeldcraftPro Chapter 1 for Team 2 (11 & 12 March 2020)
- Open Water Day 5 For Team 1 (13 March 2020)
- Open Water Day 6 For Team 1 and Training Centre Facilities (14 March 2020)
- Briefing On Covid19 To Staff & Students (16 March 2020)
- Briefing and screening, Covid test and Discovery Scuba(Theory class) for Team 3 – 13 July 2020
- Briefing and screening, Covid test and Discovery Scuba(Theory class) for Team 4 – 20 July 2020
Achievements
Date: 14th January 2022
Greetings.
We are pleased to announce that MM Matrix Integrity (M) Sdn Bhd has registered a trademark for MM Hybrid Repair with MyIPO on 17th December 2021. The main purpose of this trademark registration is to protect MM Hybrid Repair from infringement by other industry players.
Date: 4th January 2022
Greetings!
We would like to inform all that MM Matrix Integrity (M) Sdn Bhd (MMMI) is the Owner/Patent Holder for the patent grant – A METHOD FOR REPAIRING ACTIVE LEAKS ON PIPES OR PIPELINES. For your information, any active leak composite repair that is carried out in Malaysia, beyond Defect Type B (Design of repairs for through-wall defects) as per ISO 24817, either the repair is carried out ONLINE or OFFLINE, then it is classified as ʺHybrid Repairʺ category.
We also have officially submitted a letter notification to Petronas Legal Dept (HQ) and PGB. Hence, Petronas’s vendors or contractors that carried out Hybrid Repair in Malaysia must get consent or patent permission from MMMI first. In the event of any patent infringement on hybrid repair occurs, MMMI reserves its patent rights to protect its invention under Section 31 (2) of the Patents Act 1983.
Date: 20th December 2021
Assalamualaikum and greetings, everyone.
We are pleased to announce that U.W.E.C (i.e. one of internationally accredited schools by Weldcraft Pro UK in Wet Welding) has nationally been accredited by Jabatan Pembangunan Kemahiran (JPK) as one of Pusat Bertauliah (Accredited Centres) in Malaysia, particularly in Dry Welding MC-024. Upon graduation, students will be assisted and given the privilege to follow our UWEC Roadmap to becoming commercial divers and Professional Weldcraft Pro Wet Welders. This is really a new gateway to a promising and professional career in underwater engineering.
Date : 11th August 2021
Platform : Corporate Vision Magazine Online
Reference: https://www.corporatevision-news.com/winners/mm-matrix-integrity-m-sdn-bhd/
Awards: Best Oil & Gas Maintenance Solutions Provider 2021 – Asia
Date : 5th August 2020
Place : Malakat Mall, Cyberjaya
Reference: MOU Signing Ceremony with Kuala Lumpur International Chambers of Commerce (KLICC) for Professional Diploma in Underwater Welding (Level 4)
Perkara: Memorandum Persefahaman Program Kerjasama Latihan Kemahiran dan Persijilan Professional Dalam Bidang Underwater Welding di Pusat Latihan Teknologi Tinggi (ADTEC) Kemaman, Terengganu
Tarikh: 12 November 2018
Tempat: Kementerian Sumber Manusia, Putrajaya
Date: 20th July 2018
Venue: Connexion Nexus, Bangsar South City
Awards: Emerging SME
Photostress Case Study: Validation of PhotoStress Method for Stress Analysis on a Pipe Spool
MM Matrix Integrity (M) Sdn Bhd (Malaysia) invited PETRONAS Group Technical Solutions to observe a demonstration of the PhotoStress® method. The demonstration’s purpose was to confirm that the PhotoStress® technology is reliable for measuring surface strain at defect and away from the defect areas (nominal). Qualitative and quantitative analyses were performed on a carbon steel pipe spool, and results were validated against strain gage readings and empirical values.
Click here to read the full case study: http://www.vishaypg.com/docs/25529/25529.pdf
Click here for more details: https://www.strainblog.com/content/photostress-proven-optical-method-stress-analysis
Date: 16th January 2018
Venue: Connexion Nexus, Bangsar South City
Awards: Rising Star Special Mention
Date : 6th May 2017
Place : KL Convention Centre (KL CC)
Reference: Bank Islam – Utusan Shariah SME Awards 2017 Best Emerging SME (Best Growth)
Meetings and Visits
Date: 26th July 2022
Venue: MM Matrix Integrity (M) Sdn Bhd
Purpose: Collaboration to conduct UWEC courses with KLIA College
Date: 18th July 2022
Venue: Cyberjaya
Purpose: Presentation for structure/pipeline repairs and maintenance
Date: 04th July 2022
Venue: MM Matrix Integrity (M) Sdn Bhd
Purpose: Collaboration to conduct UWEC courses and set up Training Centre @ Semporna, Sabah.
Date: 01st July
Venue: Melaka Strait
Purpose: Site Survey activity on Floating Storage Unit Vessels
Date: 24th June 2022
Venue: MM Matrix Integrity (M) Sdn Bhd
Purpose: MM Hybrid Repair Products Presentation
Date: 22nd June 2022
Venue: MM Matrix Integrity (M) Sdn Bhd
Purpose: MM Hybrid Repair Products Presentation & Demonstration of Underwater Wrapping
Date: 11th June 2022
Venue: MM Matrix Integrity (M) Sdn Bhd
Purpose: Industrial visit from Universiti Kuala Lumpur Malaysian Institute of Marine Engineering Technology
Thank you to UniKL MIMET for visiting our training centre last Saturday on June 11th 2022. We hope the visit will inspire you to join our underwater welding training and become professional wet welders. See you again soon!.
2. LT. MUHAMAD NURALIFF BIN RAMANI TLDM
Purpose: Meeting with Mr Naza from Media Prima for promotion on UWEC training and MMMI services.
Purpose: Meeting with Dr Azlan Hj Alias, Senior Academic Advisor from Kuala Lumpur International Education Consortium.
Program: 1. Professional Diploma in Underwater Welding (level 4)
2. Collaboration with UTM Space for APEL program
Date: 15th July 2021
Place: Online via Google Meet
Purpose: Another historical and great event for Underwater Welding Engineering Centre (UWEC) again as Tentera Laut DiRaja Malaysia / Royal Malaysian Navy (RMN) has officially invited UWEC to present (Virtual Conference) on the Perspective of Underwater Welding in Malaysia and Introduction of Malaysian Underwater Welding Society (MUWS). UWEC which is under MM Matrix Integrity (M) Sdn Bhd (MMMI) and also one of Weldcraft Pro approved schools in the world would like to thank you RMN for giving this opportunity and showing a great interest in Wet Welding Engineering field in Malaysia.
Date: 9th April 2021
Place: MMMI Office
Purpose: To discuss a new product development of Industry 4.0 preventive alarm systems in kitchen and vehicle. Cikgu Shukri (Retired) from SMK Baling Kedah presented on the design concept and fundamentals to MMMI team on 9/4/21 (Friday).
Date : 22nd February 2021
Place : MMMI Office
Purpose : To discuss the business plan 2021 and project matters.
Date : 15th January & 2nd February 2021
Place : MMMI Office
Purpose: Moving towards ISO Development.
Date: 08th October 2020
Purpose: The 7th Committee Meeting
Place: Meeting Room MM Matrix Integrity
Date : 28th September 2020
Place: Underwater Welding Engineering Centre (UWEC) / MM Matrix Integrity (M) Sdn Bhd (MMMI)
Purpose : To discuss regarding MUWS way forward and activities in Year 2020
Date : 19th August 2020
Place: Northport
Purpose : Wire Rope Flaw Detector Presentation & Product Demo at Northport.
Date : 13th August 2020
Place: Underwater Welding Engineering Centre (UWEC)/MM Matrix Integrity (M) Sdn Bhd (MMMI)
Purpose: Visit from Kuala Lumpur International Chambers of Commerce (KLICC) Education Group. Collaboration for Professional Diploma in Wet Welding Management
Date : 7th August 2020
Place: Underwater Welding Engineering Centre (UWEC)/MM Matrix Integrity (M) Sdn Bhd (MMMI)
Purpose : Meeting with Ustaz Amin, the the Public Safety Diving Course Director.
Date: 16th July 2020
Place: Underwater Welding Engineering Centre (UWEC) / MM Matrix Integrity (M) Sdn Bhd (MMMI).
Purpose: Meeting with Universiti Kuala Lumpur Malaysian Institute of Marine Engineering Technology (UniKL-MIMET)
Date: 15th July 2020
Place: AWH International Logistics Sdn Bhd
Purpose: –
Date: 14th July 2020
Place: Underwater Welding Engineering Centre (UWEC) / MM Matrix Integrity (M) Sdn Bhd (MMMI).
Purpose: Visit from Kuala Lumpur International Chambers of Commerce (KLICC) Education Group. Collaboration for Professional Diploma in Wet Welding Management
Date: 7th July 2020
Place: Underwater Welding Engineering Centre (UWEC) / MM Matrix Integrity (M) Sdn Bhd (MMMI).
Purpose: CDN induction meeting with Lieutenant Commander (R) Hj Sofee- Course Director of NAWI
Date: 3rd July 2020
Place: Underwater Welding Engineering Centre (UWEC) / MM Matrix Integrity (M) Sdn Bhd (MMMI).
Purpose: Meeting with Instructors of Commercial Diver Network (CDN) including Ijam Medicine.
Date: 15th January 2020
Place: Kg. Sg. Buah Luar, Dengkil, Sepang
Purpose: Site visit with Dato Setia Diraja Dato Abdul Ghani Pateh Akhir (Penaung / Patron) to open up the Sepang Diving and Recreational Centre and develop the lake area in terms of infrastructures and etc.
Date: 12th January 2020
Place: Kg Sg Buah Luar, Dengkil, Sepang
Purpose: Meeting with Chairman of Persatuan Penduduk Kg Sg Buah Luar, Dengkil, Sepang to run the diving activities at Tasik Idaman Kg Sg Buah Luar.
Date: 23rd November 2019
Place: Underwater Welding Engineering Centre (UWEC) / MM Matrix Integrity (M) Sdn Bhd (MMMI).
Purpose: First Annual General Meeting (AGM) of Malaysian Underwater Welding Society (MUWS). Congratulations to the newly appointed committee members and also members who attended and supported this historic and important event. For potential members, come and join us!
Date: 21st November 2019
Place: MM Matrix Integrity (M) Sdn Bhd
Purpose: Audit Visit from CIDB and TWI to UWEC School.
Date: 12th November 2019
Place: Dome Bangsar
Purpose: Meeting with Datuk Wira Hj Ameer Ali Mydin regarding the BRO Mentorship Program.
Date: 6th November 2019
Place: MITRA Putrajaya
Purpose: Meeting with Director and Director General of MITRA for Grant Application for Underwater Welding Engineering Program.
Date: 30th October 2019
Place: 1) Sg. Langat Dam
2) Semenyih Dam
3) Sg. Labu ORS Dam, Sepang
Purpose: Tender Briefing and Site Visit
- Sg. Langat Dam
2) Semenyih Dam
3) Sg. Labu ORS Dam, Sepang
Date: 9th October 2019
Place: MM Matrix Integrity (M) Sdn Bhd
Purpose: Meeting with Training Consultant regarding MITRA Program.
Date: 26th September 2019
Place: Hulu Langat
Purpose: Completion af a House under Lembaga Zakat Selangor Constructed by MMMI.
Date: 4th September 2019
Place: DEWA Power Station in Dubai
Purpose: Presentation to Siemens (Operation and Maintenance O&M) at DEWA Power Station in Dubai.
Date: 4th September 2019
Place: Abu Dhabi
Purpose: Presentation to Mr Omar – A strategic partner in promoting MMMI structural integrity solutions (e.g MM Hybrid Repair Solutions) in Abu Dhabi and Dubai UAE.
Date: 3rd September 2019
Place: Hulu Langat, Selangor
Purpose: Site Visit to Construction of New Houses under Lembaga Zakat Selangor (LZS)
Date: 29th August 2019
Place: Pengerang Terminal 2 (PT2)
Purpose: A Technical Presentation to Pengerang Terminal 2 (PT2) team on Total Structural Integrity Solutions.
Date: 22nd August 2019
Place: MM Matrix Integrity (M) Sdn Bhd
Purpose: Business Development Meeting attended by the management representatives.
Date: 14th-15th August 2019
Place : SealXpert Products Paya Ubi Industrial Park in Singapore
Purpose: Technical Training and Business Development Meeting at SealXpert Products Paya Ubi Industrial Park in Singapore
Date: 11th July 2019
Place: MM Matrix Integrity (M) Sdn Bhd
Purpose: Opening Ceremony of Underwater Welding Engineering Centre (UWEC)
11th July 2019 is the historical day and a new milestone for UWEC MMMI Malaysia. It was successfully officiated by UWEC’s Condescendent / Advisor, YAD Dato’ Setia Diraja Dato’ Haji Abdul Ghani bin Haji Pateh Akhir and witnessed by the Weldcraft Pro Founder, Mr. David J. Keats. Thank you everyone for your supports.
Date: 27th June 2019
Place: CAPE-UTP, Menara Kembar Bank Rakyat
Purpose: Scanimetrics CBM Presentation to Petronas GTS PRSB & UTP.
Date: 24th June 2019
Place: MMMI Office
A breakthrough meeting to penetrate into Saudi Arabian and Australian markets through the right local market partners and genuine collaborators; Mr Motlaq Almotairy, the CEO of Axis Corporation Saudi Arabia and Mr Muhammad Hussain, the Director of Integrity Master Pty Ltd. Australia.
Date: 23 May 2019
Place: 1) Segari Perak – TNB Tower No 3
2) Taiping Perak – TNB Tower 101
3) Bukit Tengah Junjung Juru – TNB Tower No 30
Purpose: Slope Repair
- Slope repair at TNB Tower No 3, Segari Perak
2) Slope repair at TNB Tower 101, Taiping Perak
3) Slope repair at TNB Tower No 30, Bukit Tengah Junjung Juru
Date: 22 May 2019
Place: MMMI Office
Purpose: The MD of Petrosar and Austral Techsmith from Kuching Sarawak, Mr. Azfar is seriously looking forward to opening UWEC Branch in Kuching with the aim to give a priority to Sarawakians to become Professional Wet Welders and expert in Hybrid composite repair (dry and wet) starting from end of this year onward.
Date: 2 May 2019.
Place: Hulu Klang, Selangor.
Purpose: Site visit for construction of new houses for ASNAF under Lembaga Zakat Selangor (LZS) in Hulu Klang, Selangor.
Date: 18 April 2019
Place: MMMI Office
Purpose: Meeting with PPRK Polis Diraja Malaysia in MMISB office.
Date: 4 April 2019
Place: Petronas Gas Seremban Regional Office.
Purpose: Presentation to PGB GTR in Seremban for Sabah Sarawak Gas Pipelines using BOFDA and Bragg Grating (Distributed and discrete strain and temperature measurements for Gas Pipeline Monitoring)
Date: 3 April 2019
Place: Jelapang Slope Site PLUS Highway
Purpose: Proposing Real-Time Monitoring Solutions.
Date: 2 April 2019 (Tuesday)
Place: Northport & JKR, Klang
Purpose: Presentation and meeting on the Innovative Real-Time Monitoring, Weir Jones for Cranes with Dr.Iain/Mr.Abdul and Y.A.D. Dato’ Setia Diraja Dato’ Abdul Ghani bin Haji Pateh Akhir.
Date: 29th March – 4th April 2019
Place: MMMI Office
Purpose: Providing Fiber Optic training on Weir Jones Technology to MM Matrix Integrity’s staff and Meeting with Petronas Gas Berhad and other stakeholders in Malaysia.
Date: 21th March 2019
Place: MMMI Office
Purpose: Meeting with Ms. Nur Zahida from PGB CUF UK in MMISB Office.
Date: 11 February 2019
Purpose: Discussed together with representatives from Petronas, GTS, UiTM, UM and industries to enhance structural integrity professionalism in structural integrity in Malaysia.
Date: 29 January 2019
Purpose: Meeting with Puan Masni and the team regarding the Domestic Investment Strategic Fund (DISF).
Date: 27th June 2018
Propose: Presentation on Dam Monitoring, representatives from Mr. Faizi (Head of Dam Section), Mr. Nik Badli (Engineer) and Mr. Azmi (Engineer).
MMMI’s Representatives: Ir. Dr. Mahadi Abd Murad (Managing Director), Mr. Zool Fairiez Syatereiy (General Manager), Dr. Chris Sellathamby (Weir-Jones Group of Companies) and Mr. Abdul Mohamud (Weir-Jones Specialist).
Date: 27th June 2018
Purpose: Presentation on Slope and Pipeline Monitoring, representatives from Mr. Shamsul (Operation Manager), Mr. Marzuki (Operation Manager), Mr. Ariff (Operation Engineer), Mr. Taufeeq (Operation Engineer), Mr. Surjeetpal Singh (HSE Officer) and Mr. Amir (Procurement).
MMMI’s Representatives: Ir. Dr. Mahadi Abd Murad (Managing Director), Mr. Zool Fairiez Syatereiy (General Manager), Dr. Chris Sellathamby (Weir-Jones Group of Companies) and Mr. Abdul Mohamud (Weir-Jones Specialist).
Date: 26th June 2018
Purpose: Presentation on Bridges,Rock Falls and Slope Monitoring.
PLUS’s Representatives: Dr. Bazlan & Mr. Norisam.
MMMI’s Representatives: Ir. Dr. Mahadi Abd Murad (Managing Director), Mr. Zool Fairiez Syatereiy (General Manager), Dr. Chris Sellathamby (Weir-Jones Group of Companies) and Mr. Abdul Mohamud (Weir-Jones Specialist).
Date: 25th June 2018
Purpose: Presentation on Bridges,Rock Falls and Slope Monitoring, representatives from various sector of JKR.
MMMI’s Representatives: Ir. Dr. Mahadi Abd Murad (Managing Director), Mr. Zool Fairiez Syatereiy (General Manager), Dr. Chris Sellathamby (Weir-Jones Group of Companies) and Mr. Abdul Mohamud (Weir-Jones Specialist).
Date: 22nd May 2018
Purpose: Discussed on the business planning and way forward
Representatives: Mr. Ruslan bin Zainudin (Director of Kolej Vokasional Setapak), Dato’ Dr. Ir Badaruddin Nordin (Adjunct Professor) & Mr. Mishadi.
Date: 07th May 2018
Purpose: Discussed on the business planning and way forward.
Date: 03rd May 2018
UWEC’s Condescendent: Y.A.D. Dato’ Setia Diraja Hj Abdul Ghani bin Hj Pateh Akhir
Date: 26th April 2018
Purpose: Discussed on the business planning and way forward.
Representative: Mr. Francis Oh
Date: 2nd March 2018
Purpose: Discussed regarding our business way forward and introduction of new product by SealXpert.
Representative: Mr. Sam, The Principal of SealXpert Products Singapore
Date: 06th February 2018
Purpose: Discussed on Corrosion Under Insulation (CUI) / Collaboration.
Representative: Mr. Zulkefli bin Zakba (General Manager)
Date: 12th January 2018
Purpose: Discussed on company business products and services.
Representatives: Ir Dr Mahadi Abd Murad, Managing Director and Mr. Zool Fairiez Syatereiy A. Zuhdi, Technical Manager/Head of Department
Date: 9th January 2018
Purpose: Discussed on the business planning and way forward.
Date: 08th January 2018
Purpose: Discussed on the business planning and way forward regarding Underwater Wet Welding Technology Training Program
MMMI’s Representatives: Ir. Dr. Mahadi Abd Murad (Managing Director), Mr. Zool Fairiez Syatereiy A. Zuhdi (Technical Manager/HOD) & Mr. Faizal Zolkifeli (IIW Wet Welding & Inspection Engineer)
Date: 20th December 2017
Purpose: Discussed on the business planning and way forward.
Date: 06th December 2017
Purpose: Discussed on the business planning and way forward.
Representative: Dr. Hamed Mohebbi
Date: 11th October 2017
Purpose: Discussed on Student Program (Welding Course)
Representative: Mr. Rajan from Manipal International University (MIU), Nilai
Date: 12th September 2017
Purpose: Discussed on Domestic Investment Strategic Fund (DISF)
Representative: Mr. Nazarudin (Assistant Director)
Date: 21st August 2017
Place: MM Matrix Integrity (M) Sdn Bhd 
Date: 16th August 2017
Purpose: Site Visit to MMMI as a requirement for SME
Date: 20th July 2017
Purpose: To get some grants from Yayasan Peneraju for students (especially dropped out) to start their career from scratch till professional (Scuba-Commercial Diving-Weldcraft Pro) with MMMI.
Date: 25th May 2017
Place: MM Matrix Integrity (M) Sdn Bhd
Purpose: Discuss way forward on collaboration between MMMI – UTP and Petronas GTS
Date : 25th April 2017
Place : Petronas MLNG, Bintulu, Sarawak.
Purpose : Presentation on MMMI structural integrity solutions, PhotoStress Method and Scanimetrics.
Date : 3rd April 2017
Place : MMMI Office
Purpose : MM Matrix Integrity (M) Sdn Bhd invited TP Asrul from Petronas GTS to have a meeting and demonstration on PhotoStress method for stress analysis.
Date : 6th March 2017
Place : SIRIM, Shah Alam
Date : 22nd February 2017
Place : Edmonton, Canada
Purpose : Business trip to Scanimetrics
Date : 22nd February 2017
Place : Vancouver, Canada
Purpose : Business trip to Weir-jones
Date : 13 – 15 February 2017
Place : MMMI Office
Purpose: Instructors Qualification Program (WeldCraft-Pro)
Date : 12th January 2017
Place : MMMI Office
Purpose : Site Visit to MMMI as a requirement for PUNB
Date : 22nd December 2016
Purpose : inspector to witness the welder test
Date : 20th December 2016
Place : MMMI Office
Date : 30th November 2016
Place : MMMI Office
Date : 6 – 12 November 2016
Place : MMMI Office
Purpose : Weldcraft-Pro Audit and Instructors Training Program
